17 October 2011

Taiwanese LED chip maker Epistar adopts KLA-Tencor’s Candela inspection system

Process control and yield management solutions provider KLA-Tencor Corp of Milpitas, CA, USA says that Taiwan-based LED chip maker Epistar has adopted its Candela substrate and epitaxy wafer inspection system. KLA-Tencor says that the order marks the growing adoption by LED device makers worldwide of the inspection system for wafer defect detection and classification at production-grade throughputs.

The introduction of the Candela tool to Epistar’s manufacturing process provides automated inspection methods for sapphire substrates to ensure vendor quality, and provides greater visibility into the gallium nitride (GaN) epi process to help detect root-cause defectivity and early prediction of process excursions. “Adoption of KLA-Tencor’s Candela inspection has provided Epistar with improved sapphire quality control and MOCVD process control,” says Epistar.

Substrate defects are known to impact epi process yield, and the Candela system provides increased sensitivity to these yield-limiting defects, says KLA-Tencor. With its proprietary optical design and detection technology, the Candela system detects and classifies sub-micron defects, including micro-cracks and micro-scratches, polishing and brushing streaks, and chemical residues.

As LED makers transition production to larger wafer sizes and introduce new patterned sapphire substrate (PSS) processes, the economic impact of resulting process-induced defects is significant. For defects occurring during the epi process steps, the Candela tool can detect hexagonal pits and bumps which can lead to electrical failure and epi cracks that can adversely impact field reliability, says KLA-Tencor.

“The Candela system allows LED manufacturers to conduct root-cause analysis to speed process development, quickly fine tune production processes to minimize process excursions, and ultimately achieve higher yield per wafer,” says Jeff Donnelly, group VP, Growth and Emerging Markets (GEM) Group at KLA-Tencor. “We are pleased to add Epistar to the growing list of Candela adopters.”

The Candela tool is now installed in Epistar's Taiwan facility, adding to the hundreds of Candela tools currently installed around the world. Candela is part of KLA-Tencor’s integrated LED portfolio, which includes the ICOS WI-series and Klarity LED.

Tags: KLA-Tencor Epistar LED chips Inspection system

Visit: www.kla-tencor.com



Share/Save/Bookmark
See Latest IssueRSS Feed