Temescal

ARM Purification

CLICK HERE: free registration for Semiconductor Today and Semiconductor Today ASIACLICK HERE: free registration for Semiconductor Today and Semiconductor Today ASIA

Join our LinkedIn group!

Follow ST on Twitter

IQE

21 October 2019

Imec reports monolithic quantum-dot-based thin-film SWIR image sensor with record pixel density

Nanoelectronics research centre imec of Leuven, Belgium has presented a new thin-film monolithic image sensor that captures light in the near-infrared (NIR) and short-wavelength infrared (SWIR). Based on a monolithic approach, the process promises an order of magnitude gain in fabrication throughput and cost compared with processing existing conventional IR imagers, it is reckoned, while at the same time enabling multi-megapixel resolution. IR imagers are used in a wide variety of applications, and imec says that its new technology greatly extends their possibilities, including surveillance, biometric identification, virtual reality (VR), machine vision, and industrial automation.

Picture: Wafer with image sensors for SWIR range. Processed at wafer-scale, the thin-film imagers can be produced with increased throughput and cost compared to existing conventional IR imagers while enabling multi-megapixel resolution.

To date, infrared image sensors are produced through a hybrid technology: the crystalline semiconductor detector and the electronic readout are fabricated separately and then interconnected at pixel or chip periphery level. This is an expensive and time-consuming process with low throughput, resulting in sensors with restricted resolution that often require cooling to reduce the signal noise under dark conditions. This prevents widespread use of IR imagers in consumer applications. For some time, researchers have been looking at various monolithic approaches. Imec says that its approach paves the way to high-resolution, low-cost, wafer-based SWIR imagers.

Imec’s IR imagers consist of a novel thin-film photodetector pixel stack based on quantum dots deposited directly on top of an electronic readout. They are manufactured in a monolithic process compatible with wafer-based mass production. The pixels embed newly developed high-performance low-bandgap quantum dot materials that match or even surpass the performance of inorganic light absorbers. The stacks have been engineered so that they can be tuned to target a spectrum from visible light all the way up to 2µm wavelength. Test photodiodes on silicon substrate achieve an external quantum efficiency above 60% at 940nm wavelength (exceeding the state-of-the-art) and above 20% at 1450nm, allowing for uncooled operation with dark current comparable to commercial indium gallium arsenide (InGaAs) photodetectors. The prototype imager has resolution of 758x512 pixels and 5µm pixel pitch.

Picture: Monolithic thin-film image sensor for the SWIR range, processed at die level. Imec works towards scaling the process to wafer level, which increases throughput and cost compared to existing conventional IR imagers, while at the same time enabling multi-megapixel resolution.

The thin-film imager is “a collaborative result of several teams with expertise ranging from chemistry, device engineering, readout design through integration and fab manufacturing,” says Pawel Malinowski, imec’s thin-film imagers program manager. The existing SWIR photodetector is the result of several collaborations, including the Flemish VLAIO-SBO project MIRIS (IWT/150029) with academic partners Ghent University and University of Hasselt, and Flanders-based companies active in imaging technology.

“This result opens up many new applications for thin-film imagers,” Malinowski says. “Our imagers could be integrated in next-generation world-facing smartphone cameras coupled with eye-safe light sources, enabling compact sensing modules for augmented reality. In inspection, they could be used for food or plastics sorting, and in surveillance for low-light cameras with better contrast. Additionally, by enabling feature distinction in bad weather or smoke conditions, one can envision firefighting applications and, in the future, Advanced Driver Assistance Systems (ADAS).”

Looking further, imec aims to develop a wafer-level NIR and SWIR image sensor technology and develop technologies for companies with a roadmap in innovative image sensors, cameras and smart imaging applications.

Tags: IMEC IR detectors

Visit: www.imec.be

Share/Save/Bookmark
See Latest IssueRSS Feed

EVG